Thursday, January 24, 2013

DIY End Tables • Extra Storage

I just love to add storage - especially in new and unexpected spaces.

It all started by recognizing we needed end tables for the sofa in the living room. We sit there often in the winter, facing the blazing wood stove, and generally with our computers in our lap. (I know, working from home is tough!). We needed end tables for the cup of tea or coffee!

I started looking for something to buy but I had some additional requirements that made store bought an impossibility. They included the following:

  • Small in size: Our living space isn't huge and we need to keep walk paths and wood cart paths open. 
  • Unique in character: Our home is nothing short of unique. We built it ourselves back in 1978 and there is only one room with all right angles. 
  • No glass tops! We are grandparents to a growing group of little ones that come and visit often. All glass tops have been removed for the next 5-8 years. 
  • Include storage: Why waste space? 

I searched in furniture stores, at furniture craft shows, and online. I found nothing. I considered baskets or trunks but sizing was off. So David and I started thinking...... and three weeks later we have two new end tables in our living room! We made them together. Here is the view looking into the living room, with a fire glowing, and the sun shinning (although it is all of 15º F. outside today.) One of the new tables is right there on the end of the sofa.

The tables are constructed by combining an oak top and base separated by fabric-covered cylinders. The fabric is leftover from years ago when we had the custom shades made. A side note about those shades - Our home is a passive solar design with large windows on the eastern and southern walls. We seal in the heat at night by pulling down those shades which run in custom wood tracks in the window molding. It's a very successful solution!



Our living room is filled with warm wood tones, and calm blues, beiges and browns. The effect is natural and cozy. We wanted the end tables to complement the existing décor.



We made a matching set of tables that are the perfect height (22") for our sofa and significantly smaller than traditional end tables. Most are 24" x 24" or larger. Ours are 24' x 13" - much narrower.


Our house is designed around the great room concept and our living area flows into the dining area, and the kitchen is around the corner behind the stairs. We love living in the open space and it allows for more dramatic space in less square footage.



Below is another view back toward the first level master bedroom. My husband is a kinetic sculptor and the piece on the wall is his incredible work. It is mechanical and does move after winding. You'll note not only our house is unique but also our source of income! If interested, his website is here and there is a video of this sculpture here. The accent wall is painted Benjamin Moore Van Deusen Blue, a favorite color of mine.



But enough about other topics! Back to the end tables. As promised, the tops lift off and the cylinders are designed for storage. I now keep my growing collection of table runners rolled up and stored in these cylinders.


The underside of the cover has circles that fit right into the cylinders. And the tops are perfect for tea!





In my next post I'll share some of the DIY secrets and steps.
Update: Tutorial is posted here.

And here is an apology - I had some very unusual technical difficulties in getting this post online this morning. If you subscribe by email, you probably got 3 or 4 messages as I ended up re-doing the post twice because of oddities in the code. Putting those Pinterest things in are giving me gray hair! I apologize for the multiple postings which I expect resulted in multiple e-mails! I'll try to do better tomorrow.

Previous Posts of Interest: 

©2013AshbeeDesign, Marji Roy
**********************
Sharing this post at the following Link Parties:
Hope to see you there as well!

Tuesday, January 22, 2013

Little House Tutorial -DIY

The paper houses that I shared with you in my previous post were truly quite easy to make. Each house is a separate design that I created in iDraw, imported into Silhouette Studio and cut on the Silhouette cutting machine. I'll outline the process below.


 
Supplies

  • Computer with an object drawing program ( I used iDraw which is available for both Mac and PC)
  • Silhouette Cutting Machine
  • White Card Stock
  • Glue Dots and/or paper glue
  • Sewing machine (optional)
  • Folding Tray (optional)
  • White fishline for clothes line

Procedure:

  • Note: This tutorial assumes you know how to use a drawing program and the Silhouette software. 
  • Working in an objected oriented drawing program, create a flat drawing of a simple house using ordinary shapes - rectangles and triangles.
  • Make all that you want to be paper black and any openings white.
  • My basic house looked like this.Notice the outline of the door. This is so the machine will cut the door opening on 3 sides.



  • Add sides to all edges that are 3/4" deep. These will get folded back to give the house the depth of the ledge.


House with 3/4" sides added
  • Duplicate the front of the house and add that to one side. This will be the back.
  • Notice the little white notches. Those are fold indicators for after it is cut out.

House with back side added


  • That is the basic house.
  • Add tabs to all areas that will need to be glued together.

  • View of house with all added tabs for glueing.

  • Here I have highlighted all the glue tabs in pink. These will fold back and give a glue surface. (Pink is only for this demonstration.)


  • This view shows all the shapes I used outlined in pink. The pink is only for this picture so you can see how I built up this house from basic shapes.
  • Have them all black for your project.
  • The large rectangle off to the right will be an added roof.
  • Export the file from your drawing program as a pdf file.



  • Open the pdf file in the Silhouette Studio software. You must open the Silhouette software and then open the pdf from within the program.
  • Click on the Trace icon and select the area to be traced.
  • Change the trace settings to turnoff the high Pass Filter.


  • My settings were set as shown above.
  • Trace the design.

  • Delete the original and your cut file will look like this.

  • Set the cut settings for the thickness of your specific card stock and cut the design,
  • Once the cut is complete, remove it from the backing.

  • I used the Martha Stewart Folding tray to help mark all fold lines. This tool is invaluable in make clean, crisp folds.

  • Fold the house on all fold seams.

  • Using either glue dots or a quick drying paper glue, glue the tabs in place to hold the house in a 3-d form.


  • I add a second roof to all houses because I like the appearance of the overhangs. 

  • That completes one house. I designed three different types as pictured in the original blog here.

A country cottage

A two story town house

A Greek Revival house
  • Now move onto the accessories. 
  • The trees are two pine tree silhouettes cut out and sewed together.


  • I made a picket fence file from a series of long rectangles directly in the Silhouette Software.


  • I sketched simple clothing outlines and cut those with the silhoutte. 
  • They were doubled and connected at the shoulders to fold over the line and glued in place.


  • I threaded the clothes line into the side of a house and taped it in place on the back side.


  • I also threaded it through the tree and knotted the other end in place.


  • Using Blue tack adhesive, I stuck the various parts of the village to the wall.


  • With the end result being a Ledge Village!

I designed this village for the ironing board ledge in my laundry room but it would look wonderful on any number of ledges, like over a door or window frame, on top of a picture frame, or on a narrow picture ledge. Be creative. Make a village and send me photographs!

Previous Posts of Interest:


©2013AshbeeDesign, Marji Roy
**********************
Sharing this post at the following Link Parties:
Hope to see you there as well!


Sunday, January 20, 2013

Little Houses in My Laundry Room

I have shared many posts with you about the process of taking my laundry room from studs and insulation to a amazing new space. (How often do you hear someone speak glowingly of their laundry room?) When I last posted I said that adding décor touches and artwork was still on the to-do list. Well, this weekend I completed my first craft project for the room. I now have a "Ledge Village" cut from paper residing on my ironing board ledge.

Using the software on my Silhouette machine along with a drawing program, I designed and then cut three tiny houses and arranged them in street fashion along the ledge installed to hold my hidden ironing board in place. I have been collecting tiny house pins on Pinterest for months and knew this was leading to a project. Once the ledge was designed into the room, I started thinking about what to put on it.


Houses, of course! And to complete the scene I added two trees (same ones as in my birch centerpiece) and the line filled with drying clothes blowing in the breeze.



This little street scene is tiny. Here is a view with the electric outlet to give you a good idea as to scale.


I designed a series of different houses and learned that gable end view worked best in this application. I went on to design 3 different structures including a country cottage...


A Greek Revival styled home....


And a two story town house.....

But the fun is in the details including the picket fence, pine trees and laundry.

And I kept the entire scene white to match the room.


Still exploring my Silhouette and learning the software. I will work on the tutorial over the next couple of days and post that so you can see the process.

Update: The tutorial is live. Click here for the step-by-step process.



First craft project for the laundry room done. At least two more to go!

Previous Posts of Interest:



©2013AshbeeDesign, Marji Roy
**********************
Sharing this post at the following Link Parties:
Hope to see you there as well!